Driving Your Vehicle

Operating Conditions

~1min read

• Go to "User Settings → Driving Assist" and select "Rear Cross Traffic Collision Warning" on the LCD display.

The system will turn on and enter standby mode. If you deactivate this function in the cluster, the system will stop.

✽ NOTICE

  • If the vehicle is turned off and then on again, the RCCW system will return to the state it was in immediately before the vehicle was turned off.
  • The system is activated when vehicle speed is below 10 km/h and the shift lever is in the R (Reverse) position.
  • The Rear Cross Traffic Collision Warning (RCCW) detection range is approximately 0.5 m ~ 20 m (1 ft ~ 65 ft) on both sides of the vehicle.
    An approaching vehicle will be detected if its speed is within 4 km/h ~ 36 km/h.
    Note that the detection range may vary under certain conditions. Always be careful and pay close attention to your surroundings when backing up your vehicle.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.