Body Electrical System

Start/Stop Button

3steps
~18min
2/5difficulty
Done 0 of 3

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the center lower panel of the airbag.

    (Refer to Body - "Center Lower Panel")

  3. Remove the push button start switch (A) after loosening the screws.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.