Heating, Ventilation and Air Conditioning

A/C Pressure Transducer Repair procedures

8steps
~48min
3/5difficulty
Done 0 of 8

Inspection

  1. Measure the pressure of high pressure line by measuring voltage output between terminals "1" and “2”.

  2. Check if the voltage is within specification.

    Voltage = 0.00878835 * Pressure + 0.37081095

  3. If the measured voltage is not wihtin specification, replace the A/C pressure transducer.

Replacement

  1. Disconnect the negative (-) battery terminal.

  2. Recover the refrigerant with a recovery/charging station.

  3. Disconnect the A/C pressure transducer connector (A).

  4. Remove the A/C pressure transducer (A).

  5. Install in the reverse order of removal.