Heating, Ventilation and Air Conditioning

Receiver-Drier Repair procedures

6steps
~36min
2/5difficulty
0102030405014.711N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Replacement

  1. Remove the condenser.

  2. Remove the cap (B) on the bottom of the condenser with an L wrench (A).

    Tightening torque : 9.81 - 14,7 N·m

  3. Remove the receiver-drier (A) from condenser using long nose pliers. Check for crumbled receiver-drier and clogged bottom cap filter.

  4. Apply air conditioning compressor oil along the O-rings and threads of the new bottom cap.

  5. Insert a new receiver-drier into the receiver drier tank. The receiver-drier must be sealed in vacuum before it is exposed to air for use.

  6. Install a new bottom cap to the condenser.