Heating, Ventilation and Air Conditioning

Condenser Repair procedures

10steps
~60min
4/5difficulty
0102030405011.79N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Inspection

  1. Check the condenser fins for clogging and damage. Clean and blow compressed air on any clogged fins. Unfold any bent fins with a screwdriver or pliers.

  2. Check the condenser connections for leakage, and repair or replace it, if required.

Replacement

  1. Recover the refrigerant with a recovery / recycling / charging station.

  2. Disconnect the negative (-) battery terminal.

  3. Remove the front bumper.

    (Refer to Body - "Front Bumper Cover")

  4. Remove the active air flap.

    (Engine mechanical system - see "Active Air Flap (AAF)")

  5. Loosen the bolt and remove the coolant hose (A).

    Tightening torque : 7.8 - 11,7 N·m

  6. Loosen the bolts and then separate the liquid line (A).

  7. Loosen the mounting bolts and remove the condenser (A).

  8. Install in the reverse order of removal.