Heating, Ventilation and Air Conditioning
Compressor Troubleshooting
In this manual: Heating, Ventilation and Air Conditioning
~1min read
Troubleshooting

| Fault code | Fail description | Remedy |
| 60 | Compressor CAN signal fault | 1. Check HV, LV connector connection. 2. Check LV connector pin condition. 3. Check vehicle inverter fuse condition. 4. A/C ON then check compressor operation. 5. If it does not operate, replace compressor. |
| 61 | Compressor operation state error received | |
| 62 | Low voltage | 1. Check HV connector connection. 2. Check vehicle inverter fuse condition. 3. Check voltage level of high voltage battery. 4. A/C ON then check compressor operation. 5. If it does not operate, replace compressor. |
| 63 | High voltage | 1. Identify vehicle model on compressor. 2. Check voltage level of high voltage battery. 3. A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
| 65 | Overheat protection | 1. Check heating object in engine room. 2. Check A/C system for defects. 3. After 20 minutes, IG ON and A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
| 67 | Over current protection | 1. Check cooling fan operation. 2. Check AAF(Active Air Flap) for short circuit. 3. After 20 minutes, IG ON and A/C ON then check compressor operation. 4. If it does not operate, replace compressor. |
| 69 | Missed restart | |
| 70 | Over torque protection | |
| 71 | A/C on Operating Permission Not Received | 1. Check the BMS. 2. Check the high voltage wiring shorted. |
| 72 | A/C Compressor Permission Power Not Received | |
| 68 | Current Measurement Error | 1. If it does not operate, replace compressor. 2. Check vehicle inverter fuse condition. |
| 78 | Compressor Interlock Circuit OPEN |
Was this page helpful?