Emission Control System

Positive Crankcase Ventilation (PCV) Valve Components and Components Location

5steps
~30min
2/5difficulty
010203040502.82N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Contents:

Positive Crankcase Ventilation (PCV) Valve Components and Components Location

Component Location

Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Components and Components Location / Component Location illustration
1. Engine Cover 2. PCV Valve
2-a. 1.9 - 2,8 N·m (0.19 - 0.29 kgf·m, 1.4 - 2.1 lb·ft, 16.5 - 25.2 lb·in)

Positive Crankcase Ventilation (PCV) Valve Description and Operation

Operating Principle

Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Description and Operation / Operating Principle illustration
Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Description and Operation / Operating Principle illustration

Positive Crankcase Ventilation (PCV) Valve Removal and Installation

Removal

  1. Remove the engine cover. (Refer to Engine Mechanical System - "Engine Cover")
  2. Remove the vapor hose (A).
    Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Removal and Installation / Removal illustration
  3. Remove the PCV valve (A).
    Tightening torque : 1.9 - 2,8 N·m (0.19 - 0.29 kgf·m, 1.4 - 2.1 lb·ft, 16.5 - 25.2 lb·in)
    Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Removal and Installation / Removal illustration

Installation

  1. Install in reverse order of removal.
    Note
    • Install the Positive Crankcase Ventilation (PCV) valve to the specified torque.
    • Be careful not to get foreign matters into the PCV valve.

Positive Crankcase Ventilation (PCV) Valve Inspection

Inspection

  1. Remove the Positive Crankcase Ventilation (PCV) valve. (Refer to Positive Crankcase Ventilation (PCV) Valve - "Removal and Installation")
  2. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.
    Emission Control System — Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve / Inspection illustration
    Note
    If the plunger does not move (PCV valve is clogged), clean or replace the valve.