Engine Control / Fuel System

~4min read

Contents:

Single-Use Parts

Single-Use Parts

Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be replaced. Kia Non-reusable parts are designed to be installed only once. Before working on a vehicle, check “Components and Components Location” to find the non-reusable parts in a system. ※ Symbol of Non-reusable parts
Symbol Meaning
Engine Control / Fuel System — Single-Use Parts illustration
Do not reuse the part. Replace with a new one.

※ Example of “Components and Components Location”
Engine Control / Fuel System — Single-Use Parts illustration

Specification ➤

Special Service Tools

Special Service Tool

Tool Name / Number Illustration Description
Fuel pressure gauge adapter
09353 - 38000
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for connecting between the delivery pipe and the fuel feed line
Fuel pressure gauge adapter
09353 - 24000
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for connecting between the fuel pressure gauge adapter and the fuel pressure gauge
Fuel pressure gauge
09353 - 24100
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for measuring the pressure in fuel line
Heated oxygen sensor socket
09392 - 1Y100
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for removing / installing the heated oxygen sensor
※ SST 09392 - 2H100 also can be used
Low fuel pump plate cover remover
09310 - B8100
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for removing / installing the low pressure fuel pump plate cover
Injector combustion seal ring guide & sizing tool
09353 - L1100
Engine Control / Fuel System — Special Service Tools / Special Service Tool illustration
Used for installing injector combustion seal ring on injector

Troubleshooting

Basic Troubleshooting Guide

Engine Control / Fuel System — Troubleshooting / Basic Troubleshooting Guide illustration
Symptom Troubleshooting Guide Chart Unable to start (Engine won't crank)
Inspection Procedure Remark
1) Inspect battery
2) Inspect starter
3) Inspect position sensor
4) Inspect Integrated Body control Unit (IBU) (when immobilizer warning lamp is on)
• Check the DTC

Unable to start (Incomplete combustion)
Inspection Procedure Remark
1) Inspect battery
2) Inspect fuel pressure
3) Inspect ignition system
• Check the DTC
• Low fuel pressure
• Intake air leakage
• Slipped or broken timing chain (belt)
• Contaminated fuel

Hard to start
Inspection Procedure Remark
1) Inspect battery
2) Inspect fuel pressure
Inspect Engine Coolant Temperature Sensor (ECTS) and circuit (Check the DTC)
4) Inspect ignition system
• Check the DTC
• Low fuel pressure
• Intake air leakage
• Contaminated fuel
• Weak sparks when ignited

Unstable idling
Inspection Procedure Remark
1) Inspect fuel pressure
2) Inspect injector
3) Inspect long-term fuel trim and short-term fuel trim
4) Inspect idle speed control system (Check the DTC)
5) Inspect and test Electronic Throttle Control (ETC) module
6) Inspect Engine Coolant Temperature Sensor (ECTS) and circuit (Check the DTC)
• Check the DTC
• Low fuel pressure
• Intake air leakage
• Contaminated fuel
• Weak sparks when ignited

Engine stall
Inspection Procedure Remark
1) Inspect battery
2) Inspect fuel pressure
3) Inspect idle speed control system (Check the DTC)
4) Inspect ignition system
5) Inspect Crankshaft Position Sensor (CKPS) and circuit (Check the DTC)
• Check the DTC
• Intake air leakage
• Contaminated fuel
• Weak sparks when ignited

Engine is unstable while driving
Inspection Procedure Remark
1) Inspect fuel pressure
2) Inspect and test Electronic Throttle Control (ETC) module
3) Inspect ignition system
4) Inspect Engine Coolant Temperature Sensor (ECTS) and circuit (Check the DTC)
5) Inspect exhaust system
6) Inspect long-term fuel trim and short-term fuel trim
• Check the DTC
• Low fuel pressure
• Intake air leakage
• Contaminated fuel
• Weak sparks when ignited

Engine is knocking
Inspection Procedure Remark
1) Inspect fuel pressure
2) Inspect engine coolant
3) Inspect radiator and cooling fan
4) Inspect spark plug
• Check the DTC
• Contaminated fuel

Poor fuel economy
Inspection Procedure Remark
1) Check customer's driving habits
• Is A/C or heating system (heated seat and heated steering wheel, etc.) running constantly?
• Is tire pressure proper?
• Is excessively heavy load being carried?
• Is acceleration too much, too often?
2) Inspect fuel pressure
3) Inspect injector
4) Inspect exhaust system
5) Inspect Engine Coolant Temperature Sensor (ECTS) and circuit (Check the DTC)
• Check the DTC
• Low fuel pressure
• Intake air leakage
• Contaminated fuel
• Weak sparks when ignited

Engine Control System ➤

ISG (Idle Stop & Go) System ➤

Fuel Delivery System ➤