Single-Use Parts
In this manual: Single-Use Parts
~2min read
1special tools
Contents:
Single-Use Parts
Single-Use Parts
Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be replaced. Kia Non-reusable parts are designed to be installed only once. Before working on a vehicle, check “Components and Components Location” to find the non-reusable parts in a system. ※ Symbol of Non-reusable parts| Symbol | Meaning |
![]() |
Do not reuse the part. Replace with a new one. |
※ Example of “Components and Components Location”

Specification ➤
Special Service Tools
Special Service Tool
| Tool Name / Number | Illustration | Description |
| CV joint puller 09517 - 4E000 |
![]() |
Used for removal of CV joint |
| Differential bearing remover 09501 - C9200 |
![]() |
Used for removal of differential bearing |
| Differential assembly working stand base 09501 - C9231 |
![]() |
Used for assembling or disassembling of differential carrier assembly (Used with 0K530 - P2500, 0K501 - P2232) |
| Rear differential working stand adapter 0K530 - P2500 |
![]() |
Used for assembling or disassembling of differential carrier assembly (Used with 09501 - C9231, 0K501 - P2232) |
| Sub support 0K501 - P2232 |
![]() |
Used for assembling or disassembling of differential carrier assembly (Used with 09501 - C9231, 0K530 - P2500) |
| Bearing remover 09501 - C9120 |
![]() |
Used for removal of bearing (Used with 09452 - 2E000) |
| Bearing remover (Base) 09452-2E000 |
![]() |
Used for removal of bearing (Used with 09501 - C9120) |
| Pinion oil seal remover 09455 - 32200 |
![]() |
Used for removal of pinion oil seal |
| Bearing race remover 09501 - C9140 |
![]() |
Used for removal of bearing race |
| Rear differential bearing installer 0K530 - P2300 |
![]() |
Used for installing of rear differential gear bearing |
| Rear differential bearing installer 0K530 - P2200 |
![]() |
Used for installing of pinion drive gear bearing |
| Pinion bearing race installer 09501 - C9150 |
![]() |
Used for installing of pinion bearing race |
| Pinion oil seal installer 0K530 - P2100 |
![]() |
Used for installing of pinion oil seal (Used with 09231 - H1100) |
| Differential oil seal installer 09501 - C9190 |
![]() |
Used for installing of differential carrier case side oil seal (Used with 09231 - H1100) |
| Handle 09231 - H1100 |
![]() |
(Used with 0K530 - P2100, 09501 - C9190) |
| Backlash measuring supporter 0K530 - P2400 |
![]() |
Used for measuring backlash |
| Oil seal installer 09473 - D3600 |
![]() |
Used for installing transfer case oil seal (Used with 09231 - H1100) |
| Handle 09231 - H1100 |
![]() |
Used for installing transfer case oil seal (Used with 09473 - D3600) |
Transfer Assembly ➤
AWD Control System ➤
Coupling Assembly ➤
Rear Driveshaft Assembly ➤
Propeller Shaft Assembly ➤
Rear Differential Carrier Assembly ➤
Was this page helpful?


















