Heating,Ventilation And Air Conditioning

~2min read

Contents:

Single-Use Parts

Single-Use Parts

Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be replaced. Kia Non-reusable parts are designed to be installed only once. Before working on a vehicle, check “Components and Components Location” to find the non-reusable parts in a system. ※ Symbol of Non-reusable parts
Symbol Meaning
Heating,Ventilation And Air Conditioning — Single-Use Parts illustration
Do not reuse the part. Replace with a new one.

※ Example of “Components and Components Location”
Heating,Ventilation And Air Conditioning — Single-Use Parts illustration

Specification ➤

Special Service Tools

Special Service Tool

Tool Name / Number Illustration Description
09977 - 3R000
Disc & hub assembly bolt stopper
Heating,Ventilation And Air Conditioning — Special Service Tools / Special Service Tool illustration
Used to fixing air conditioner compressor disc and hub assembly (G 2.0 MPI NU)
09977 - B9100
Disc & hub assembly bolt stopper
Heating,Ventilation And Air Conditioning — Special Service Tools / Special Service Tool illustration
Used to fixing air conditioner compressor disc and hub assembly (G 1.6 T-GDI GAMMA II)

Troubleshooting

Troubleshooting

  • Before replacing or repairing the air conditioner components, first check whether the cause of failure is refrigerant charge, air flow or compressor. After repairing, make sure the system components are complete.
  • The table below lists the symptoms and the suspected parts of the failure. Replace the parts if necessary.
No blower operation
Suspected Cause of Failure
Heater fuse
Blower relay & BLDC blower motor
BLDC blower motor
Wiring

No air temperature control
Suspected Cause of Failure
Engine coolant capacity
Heater control assembly
Faulty connection of temperature control actuator and connector

No compressor operation
Suspected Cause of Failure
Refrigerant amount
A/C fuse
Compressor
A/C Pressure Transducer
A/C switch
Evaporator Temperature Sensor
Wiring

Not blowing cold air
Suspected Cause of Failure
Refrigerant amount
Refrigerant pressure
A/C Compressor
A/C Pressure Transducer
Evaporator Temperature Sensor
A/C switch
Heater control assembly
Wiring

Insufficient cooling
Suspected Cause of Failure
Refrigerant amount
Compressor
Condenser
Expansion valve
Evaporator
Refrigerant Line
A/C Pressure Transducer
Heater control assembly

Poor air inlet control
Suspected Cause of Failure
Heater control assembly
Faulty connection of Intake control actuator and connector

No mode control
Suspected Cause of Failure
Heater control assembly
Faulty connection of mode control actuator and connector

No cooling fan operation
Suspected Cause of Failure
Cooling fan fuse
Fan motor
Engine ECU
Shorted wiring & connector

Air conditioning System ➤

Heater ➤

Blower ➤

Controller ➤