Kia Stinger CK Quiz
Engine Mechanical System

Engine Compartment Under Cover

In this manual: Engine Mechanical System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
12steps
~72min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 12

Repair Procedures

Removal and Installation

Engine Room Front Under Cover

  1. Remove the front engine room under cover (A).

    Tightening torque: 7.8–11.8 N·m

  2. Install in the reverse order of removal.

Engine Room Rear Under Cover

  1. Remove the rear engine room under cover (A).

    Tightening torque: 7.8–11.8 N·m

  2. Install in the reverse order of removal.

Engine Room Side Cover [AWD]

  1. Remove the engine compartment under cover (front).

  2. Remove the front engine room side cover (A).

    Tightening torque: 7.8–11.8 N·m

    [RH]

    [LH]

  3. Remove the rear engine room side cover (A).

    Tightening torque: 7.8–11.8 N·m

    [RH]

    [LH]

  4. Install in the reverse order of removal.

Engine Room Side Cover [2WD]

  1. Remove the engine compartment under cover (front).

  2. Remove the front stabilizer bar from the subframe.

    (See Suspension System - Front Stabilizer Bar)

  3. Remove the engine compartment side cover (A).

    Tightening torque: 7.8–11.8 N·m

    [RH]

    [LH]

  4. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.