Engine Control System/Fuel System

Filler Neck Assembly

7steps
~42min
2/5difficulty
Done 0 of 7

Repair Procedures

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.

  2. After opening the fuel tank flap, remove the fuel tank cap.

  3. Raise the vehicle.

  4. Remove the left rear wheel, tire and wheel arch cover.

  5. Disconnect the filler hose (A) and the balance hose (B).

  6. Disconnect the vent hose (A).

  7. Remove the filler neck assembly from the vehicle after removing the mounting nuts (A) of the bracket.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.