Engine Control System/Fuel System

Auxiliary Fuel Sender

7steps
~42min
2/5difficulty
Done 0 of 7

Repair Procedures

Removal

  1. Release the residual pressure in the fuel line.

    (See Fuel System - "Relieve Fuel Line Residual Pressure")

  2. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.

  3. Remove the rear seat cushion.

    (See Body - "Rear Seat Assembly")

  4. Remove the auxiliary fuel sender service cover (A) after loosening the mounting screws.

  5. Disconnect the auxiliary fuel level sensor connector (A).

  6. Remove the snap ring (B) using the special service tool (A) [No.: 09310-B8100].

  7. Remove the auxiliary fuel level sensor (A).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.