Pipe Delivery

Repair Procedures

Removal

1. 1

   Release the residual pressure in the fuel line.

   (See Fuel System - "Relieve Fuel Line Residual Pressure")

2. 2

   Turn the ignition switch OFF and disconnect the negative (-) battery terminal.

3. 3

   Remove the intake manifold.

   (Refer to Engine Mechanical System - "Intake Manifold")

4. 4

   Remove the foam insulation on the delivery pipe (A).

   

5. 5

   Remove the hood upper cover assembly.

   (Refer to Body (Interior and Exterior) - Hood Upper Cover.)

6. 6

   Remove the engine cover (A).

   

7. 7

   Disconnect the front control connector (A).

8. 8

   Remove the ground terminal nuts (B).

   

9. 9

   Remove the wiring protector (A).

   

10. 10

    Remove the high pressure fuel tube.

    1. Remove the high-pressure fuel line mounting bolt (A).

       

    2. Remove the high-pressure fuel line flange nut (A).

       

       

11. 11

    Remove the mounting bolts (A), then remove the delivery pipe and injector assembly from the engine.

    

12. 12

    Disconnect the injector and the pressure sensor connector on the delivery pipe (A).

13. 13

    Remove the injector (B) from the delivery pipe.

    

Installation

1. Install in the reverse order of removal.