Kia Stinger CK Quiz
Suspension System

Rear Toe Control Arm

In this manual: Suspension System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
7steps
~42min
2/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Repair Procedures

Removal

  1. Remove the wheel nuts, wheel and tire (A) from the hub.

    Tightening torque: 107.9–128 N·m

  2. Loosen the bolt (A), then separate the rear toe control arm from the rear axle.

    Tightening torque: 117.7–132 N·m

  3. Loosen the bolt and nut, then remove the rear toe control arm from the rear crossmember.

    Tightening torque: 137.3–157 N·m

  4. Install in the reverse order of removal.

  5. Check the alignment.

    (See Suspension System - Alignment)

Inspection

  1. Inspect the bushing for wear and damage.

  2. Check that all bolts and nuts are present.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.