Rear shock absorber

Components and Component Location

Components

Repair Procedures

Removal

1. 1

   Remove the wheel nuts, rear wheel and tire (A) from the hub.

   Tightening torque: 107.9–128 N·m

   

2. 2

   Loosen the bolt and nut of the rear shock absorber.

   Tightening torque: 156.9 - 176 N·m

   

3. 3

   Loosen the upper bolts of the rear shock absorber and remove the rear shock absorber.

   Tightening torque: 63.7–78 N·m

   

4. 4

   Install in the reverse order of removal.

Disassembly

1. 1

   Using SST (09546-3X100), loosen the lock nut of the shock absorber (A).

   Tightening torque: 21.5 - 31 N·m

   

   

2. 2

   Install in the reverse order of removal.

Inspection

1. 1

   Inspect the rubber components for wear and deterioration.

2. 2

   Compress and extend the piston rod (A) and check for abnormal resistance or unusual noise during operation.

   

Disposal

1. 1

   Fully extend the piston rod.

2. 2

   Drill a hole in the section (A) to release the gas from the cylinder.