Rear lower arm

Repair Procedures

Removal

1. 1

   Remove the wheel nuts, wheel and tire (A) from the hub.

   Tightening torque: 107.9–128 N·m

   

2. 2

   Remove the rear lower arm cover (A).

   

3. 3

   Loosen the bolt and nut of the rear lower arm, then separate the lower arm from the rear axle.

   Tightening torque: 156.9 - 176 N·m

   

4. 4

   Loosen the bolt and nut, then remove the rear lower arm.

   Tightening torque: 137.3–157 N·m

   

5. 5

   Install in the reverse order of removal.

6. 6

   Check the alignment.

   (See Suspension System - Alignment)

Inspection

1. 1

   Inspect the bushing for wear and damage.

2. 2

   Inspect the rear lower arm for deformation.

3. 3

   Check the coil spring and spring seat for wear and deformation.

4. 4

   Check that all bolts and nuts are present.