Body (Interior and Exterior)

floor carpet

11steps
~66min
3/5difficulty
0102030405031.423N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Components and Components Location

COMPONENTS LOCATION

1. Floor Carpet

repair procedures

REMOVAL AND INSTALLATION

  1. Disconnect the battery ground cable.

  2. Remove the front seat.

    (See Front Seat - Front Seat).

  3. Remove the console.

    (Refer to Floor Console - "Floor Console Assembly")

  4. Loosen the screw, then remove the rear seat cushion (A).

    Tightening torque: 21.6~31 N·m

  5. Remove the front door sill trim panel (A) using a trim removal tool.

  6. Remove the hood side panel (A) using a trim removal tool.

  7. Remove the rear rocker panel trim (A) using a trim removal tool.

8th.

Remove the front pillar trim (A).

  1. Remove the EFD seat belt (B) using the special service tool (0K888-D4200).

  2. Remove the center pillar lower trim (A) using a trim removal tool.

  3. Remove the floor mat (A).

  4. Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.