Kia Stonic Quiz
Body (Interior and Exterior)

Fender

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
7steps
~42min
2/5difficulty
Done 0 of 7

Components and Components Location

COMPONENTS LOCATION

1. Splash Shield

repair procedures

REMOVAL AND INSTALLATION

  1. Remove the headlamp.

    (Refer to Body Electrical System - Headlamps).

  2. Remove the front wheels.

    (See Body Side Moldings - Front Wheel Arch)

  3. Remove the side weatherstrip.

  4. Remove the fender apron.

  5. Loosen the mounting screws, then remove the front bumper side bracket (A). Remove the front bumper.

  6. Remove the side window panel (A) using a trim removal tool.

  7. Loosen the mounting bolts, then remove the fender assembly (A).

8th.

Installation is the reverse of removal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.