Kia Stonic Quiz
Electrical System

Blind-Spot Collision Warning (BCW) Unit

In this manual: Electrical System
General Information — 8Maintenance — 31Engine Mechanical — 49Engine Electrical — 15Emission control system — 11Engine Control System/Fuel System — 45Clutch System — 12Manual Transaxle System — 11DCT (Dual Clutch Transmission) System — 16Drive Shafts and Axles — 9Suspension — 16Steering — 10restraint system — 15Braking system — 22Body (Interior and Exterior) — 89Rear Seat — 16Electrical System — 25Electrochromic Interior Rear View Mirror — 64Heating, Ventilation, and Air Conditioning — 31
8steps
~48min
3/5difficulty
Done 0 of 8

Components and Components Location

COMPONENTS LOCATION

repair procedures

expansion

  1. Disconnect the battery ground cable.

  2. Remove the rear bumper.

    (See Body - Rear Bumper)

  3. Disconnect the BCW unit connector (A).

  4. Loosen the mounting screws and remove the BCW unit (A).

Installation

  1. Prepare the radar sensors for installation, left side and right side.

  2. Insert the radar sensor correctly into the bracket and install it with the mounting screws (note the left and right sides).

  3. Install the rear bumper.

  4. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.