transmission fluid

repair procedures

TEST

LEVEL CHECK

1. 1

   Remove the under cover.

   (Refer to Engine Mechanical - "Engine Under Cover")

2. 2

   Remove the fill plug (A).

   

3. 3

   Check the fluid condition and make sure the level (A) meets the specification.

   

4. 4

   Install the oil pan drain plug (A).

   Tightening torque: 58.9~78 N·m

   

5. 5

   Install the lower cover.

   (Refer to Engine Mechanical - "Engine Under Cover")

REMOVAL AND INSTALLATION

1. 1

   Remove the under cover.

   (Refer to Engine Mechanical - "Engine Under Cover")

2. 2

   Remove the drain plug (A) and, after draining completely, refill the fluid.

   Tightening torque: 58.9~78 N·m

   

3. 3

   Remove the fill plug (A).

   

4. 4

   Fill the transmission with transmission oil through the filler hole.

   Recommended:

   - SAE 70W, API GL-4

   Recommended transmission fluid: SK HK SYN DCTF 70W, SHELL SPIRAX S6 GHME 70W DCTF, GS CALTEX GS DCTF HD 70W

   Capacity:

   1,8-1,9 L

5. 5

   Install the oil pan drain plug (A).

   Tightening torque: 58.9~78 N·m

   

6. 6

   Install the lower cover.

   (Refer to Engine Mechanical - "Engine Under Cover")