Electronic Stability Control (ESC)

The Electronic Stability Control (ESC) system is designed to stabilize the vehicle when cornering. ESC checks the direction in which you are steering and the direction in which the vehicle is actually moving. ESC applies the brakes on individual wheels and intervenes in engine control to stabilize the vehicle.

WARNING

Never drive too fast for road conditions or too fast through corners. Electronic Stability Control (ESC) cannot prevent accidents. Excessive speed in corners, abrupt maneuvers, and hydroplaning on wet surfaces can lead to serious accidents. Only a safe and attentive driver can prevent accidents by avoiding maneuvers that cause the vehicle to lose traction with the road. Even if ESC is installed, always observe all normal driving precautions, including driving at speeds safe for the conditions.

The Electronic Stability Control (ESC) system is an electronic system designed to help the driver maintain control of the vehicle in adverse conditions. It is not a substitute for safe driving. Factors including speed, road conditions, and driver steering inputs may affect whether ESC is effective in preventing loss of control. It is still your responsibility to drive and corner at reasonable speeds and to leave an adequate safety margin.

When you depress the brake pedal under conditions that may lock the wheels, you may hear a "tick-tick" sound from the brakes, or feel a corresponding sensation in the brake pedal. This is normal and means that your ESC is active.

✽ NOTICE

A clicking sound may be heard from the engine compartment when the vehicle starts to move after the engine is started. These conditions are normal and indicate that the Electronic Stability Control (ESC) system is operating properly.