Body (Interior and Exterior)

Luggage Side Trim

8steps
~48min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Components and Component Location

Component Location

1. Luggage Compartment Side Trim

Repair Procedures

Replacement

  1. Remove the rear seat cushion assembly.

    (Refer to Rear Seat - "Rear Seat Assembly")

  2. Remove the rear seatback assembly.

    (Refer to Rear Seat - "Rear Seat Assembly")

  3. Remove the rear door pillar trim.

    (Refer to Interior Trim - "Rear Pillar Trim Panel")

  4. Remove the mounting bolts and remove the luggage compartment partition center trim cover (A).

    Tightening torque: 7.8–11.8 N·m

  5. Remove the rear crossmember trim.

    (Refer to Interior Trim - "Rear Crossmember Trim")

  6. Remove the trunk lid seal.

    (Refer to Trunk Lid - "Trunk Lid Weatherstrip")

  7. Loosen the mounting bolt and clips, then remove the luggage compartment side trim (A).

  8. To install, reverse the removal procedure.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.