Kia Optima DL3 Quiz
Body (Interior and Exterior)

Rear Parcel Tray Trim

In this manual: Body (Interior and Exterior)
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
7steps
~42min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Components and Component Location

Component Location

1. Rear Parcel Shelf Trim

Repair Procedures

Replacement

Rear Parcel Tray Trim

  1. Remove the rear seat cushion assembly.

    (Refer to Rear Seat - "Rear Seat Assembly")

  2. Remove the rear seat cushion assembly.

    (Refer to Rear Seat - "Rear Seat Assembly")

  3. Remove the rear door pillar trim.

    (Refer to Interior Trim - "Rear Pillar Trim Panel")

  4. Remove the mounting bolts and remove the luggage compartment partition center trim cover (A).

    Tightening torque: 7.8–11.8 N·m

  5. Loosen the mounting bolt and remove the lower rear seat belt anchor (A).

    Torque: 39.2 – 54 N·m

    [LH]

    [RH]

    [Center]

  6. Using a flat-blade screwdriver, remove the rear cover of the parcel shelf (A).

    Tightening torque: 7.8–11.8 N·m

  7. To install, reverse the removal procedure.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.