Kia Optima DL3 Quiz
Body (Interior and Exterior)

Rear Door Side Weatherstrip

In this manual: Body (Interior and Exterior)
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
5steps
~30min
2/5difficulty
0102030405031.423N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Repair Procedures

Replacement

[Rear Door Side Weatherstrip]

  1. Loosen the adjusting shim bolt (B) of the rear door.

    Tightening Torque: 21.6–31 N·m

  2. Disengage the clips, then remove the rear door side seal (A).

  3. To install, reverse the removal procedure.

[Rear Door Side Body Weatherstrip]

  1. Disconnect the clips, then remove the rear door body side weatherstrip (A).

  2. To install, reverse the removal procedure.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.