Turn Signal and Lane Change Signal

The ignition switch must be on for the turn signals to operate. To activate the turn signals, move the lever up or down (A).

The green arrows on the instrument panel indicate which turn signal is operating. They will cancel automatically after the turn is completed.

If the indicator continues to flash after the turn, manually return the lever to the off position.

To signal a lane change, move the turn signal lever slightly and hold it in that position (B). The lever will return to the off position when released.

If the indicator continues to illuminate without flashing, or if it flashes abnormally, one of the turn signal bulbs may have burned out and will need to be replaced.

One-Touch Lane Change Function

One-touch lane change function activation: Move the turn signal lever slightly, then release it. The lane change signal will flash 3 to 7 times. The signal duration can be changed in the user settings mode.

NOTICE

If the indicator flashes abnormally fast or slow, a bulb may be burnt out or there may be a poor electrical connection in the circuit.