Body Electrical System

Power door lock switch

6steps
~36min
2/5difficulty
Done 0 of 6

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the center lower panel of the airbag.

    (Refer to Body - "Center Crash Pad Panel")

  3. Remove the hazard warning switch (A) after loosening the mounting screws.

Installation

  1. Install the hazard switch.

  2. Install the center lower airbag panel.

  3. Connect the negative (-) battery terminal.

Inspection

  1. Check for continuity between the terminals. If there is an abnormality, replace the switch.

    No. Description No. Description
    1 Battery (+) 9 Illumination (+)
    2 IGN1 10 -
    3 PAB ON 11 PAB OFF
    4 Rear Center Seat Belt 12 Rear Right Seat Belt
    5 Passenger Airbag 13 Rear Left Seat Belt
    6 Hazard Mode 14 Door Lock Switch
    7 - 15 Door lock indicator
    8 Ground 16 Illumination (-)

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.