Body Electrical System

Power door mirror switch

9steps
~54min
2/5difficulty
Done 0 of 9

Components and Component Location

Component

Driver Window Switch

Circuit Diagrams

Wiring Diagram

[Non-Folding Mirror Type]

[Folding Mirror Type]

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the front left door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  3. Remove the power mirror switch assembly (A) by pulling both ends of the switch holders (B).

Installation

  1. Install the power mirror switch.

  2. Install the front door trim after connecting the connector.

  3. Connect the negative (-) battery terminal.

Inspection

  1. Remove the front left door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  2. Remove the power mirror switch (A) from the door trim panel.

  3. Check the continuity between terminals at each switch position in accordance with the table.

    [Power Mirror Switch]

    [Power Fold Mirror Switch]

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.