Multi-information display (GS350/GS200t). Setting screen

The setting screen of the multi-information display in the Lexus GS (L10) allows individual configuration of key functions, from Lane Keeping Assist and Road Sign Assist to pop-up displays and tire pressure monitoring. Language, units and accent colors can also be adjusted. Drivers of F SPORT models benefit in particular from additional options such as tachometer, SPORT mode gauges or G-force display. This chapter provides practical notes on safe use and warns against distraction while driving.

You can make settings for the following items.

For functions that can be turned on or off, the function switches between on and off each timeis pressed.

(Lane Departure Alert with steering control) (if equipped)

(Lane Keeping Assist) (if equipped)

(Pre-Collision System) (if equipped)

(Adaptive Front-lighting System) (if equipped)

(Lane Change Assist) (if equipped)

Select this item to turn the speed warning on or off, or to change the speed at which the speed warning is displayed.

(Road Sign Assist) (if equipped)

Select this item to set the display format of the clock.

• Engine Oil Maintenance (if equipped)
• Tire Pressure Warning System (TPWS) (if equipped)

● Language

Select this item to change the language shown on the display.

● Units

Select this item to change the units of measurement.

● Eco Driving Indicator light

Select this item to turn the Eco Driving Indicator light on or off.

● Switch

Shows how to save a desired screen foris saved.

You can save a quick access to 1 screen, which can then be called up by pressingis called up.

● Drive Info 1/2/3

Select this item to choose up to 2 items to be displayed on a driving data screen. You can set up a maximum of 3 driving data screens.

● Pop-up Display

Select this item to turn the following pop-up displays, which may appear in certain situations, on or off.

• Navigation system route guidance display (if equipped)
• Hands-free incoming call display
• Instrument panel brightness adjustment display

● Accent Color (except F SPORT models)

Select this item to change the accent colors on the screen, such as the cursor color.

● Needle (F SPORT models)

Select this item to change the color of the tachometer needle.

● Tachometer Display (F SPORT models)

Select this item to turn the tachometer display on or off.

When turned on, you must then set the engine speed at which the tachometer display will appear.

Selectable engine speed range:

GS350: 2000 rpm (min-1) to 6800 rpm (min-1)

GS200t: 2000 rpm (min-1) to 6100 rpm (min-1)

● Maximum Engine Speed Display (F SPORT models)

Select this item to turn the maximum engine speed function on or off.

● Default Settings

Stored or changed instrument settings are deleted or reset to their default settings.

G-Force Display

● The G-force may show a value other than zero even when the vehicle is parked, such as when the vehicle is parked on a slope.

● Depending on the vehicle's operating conditions, the brake fluid pressure display may not show the maximum value even when the brake pedal is fully depressed.

● If a battery terminal has been disconnected and reconnected, the steering angle display may be temporarily disabled. The display will be activated after driving for a while.

Setting Display Hiding

In the following cases, the setting display operated with the instrument panel switches is automatically hidden.

● When a warning message is displayed on the Multi-Information Display

● When the vehicle is being driven

Tire Pressure (if equipped)

● After the engine switch is set to IGNITION ON mode, it may take a few minutes for the tire pressure to be displayed. After adjusting the tire pressure, it may also take a few minutes for the new values to be displayed.

● If tire information cannot be received due to poor radio conditions, "---" may be displayed.

● Tire pressure changes with temperature. The displayed values may also differ from those measured with a tire pressure gauge.

When the battery terminals are disconnected and reconnected

The driving data is reset.

WARNING

Precautions for Use While Driving

● Pay close attention to the safety of the area around the vehicle when operating the Multi-Information Display while driving.

● Do not look at the Multi-Information Display constantly while driving, as you may fail to notice pedestrians in front of your vehicle, objects on the road, etc.

Precautions When Setting Up the Display

Because the engine must be running while setting up the display, the vehicle must be parked in a well-ventilated place. In enclosed spaces such as a garage, exhaust gases, including toxic carbon monoxide (CO), may accumulate and enter the vehicle. This may be fatal or cause serious health damage.

NOTE

While Setting Up the Display

To prevent the battery from discharging, the engine must be running while setting up the display functions.

The setting display of the Multi-Information Display in the Lexus GS 4th generation, body GRL1, model years 2016–2020, allows individual customization of vehicle information. From driver assistance systems to pop-up message display, everything can be conveniently configured. This way, the Lexus GS always stays tailored to the driver's needs.

These features highlight the intelligent technology built into the Lexus GS sports sedan. Simple operation ensures the highest level of comfort on every drive.

FAQ

Which systems can I configure via the setting display?

You can configure, among others, the Lane Departure Alert, Pre-Collision System, speed warning and the pop-up displays.

Can the settings be changed at any time?

Changes are possible as long as no warning message is displayed and the vehicle is stationary.