Turn signals and lane change

NOTE

• If one of the indicators stays on without flashing or flashes abnormally, one of the turn signal bulbs may be burned out.
• A customization setting can be used to change the turn signal sound volume. Refer to Customization Settings on page 9-9.

Turn signals

Move the lever up (to turn right) or down (to turn left) from the off position. The turn signal cancels automatically after the turn is completed.

If the indicator continues to flash after a turn, manually return the lever to the off position.

The green indicators on the instrument panel show which signal is operating.

Lane change

Move the lever partially in the direction of the lane change until the indicator flashes, and hold it. It returns automatically to the off position when released.