Electrical load signal
Description
The electrical load signal (Headlamp switch signal, rear window defogger switch signal, etc.) is transferred to ECM through the CAN communication line.
Component Function Check
1.CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION 1. Turn ignition switch ON. 2. Select “DATA MONITOR” mode with CONSULT-III.3. Select “LOAD SIGNAL” and check indication under the following conditions.

Is the inspection result normal? YES >> GO TO 2.
NO >> Go to EC-776, "Diagnosis Procedure".
2.CHECK LIGHTING SWITCH FUNCTIONCheck “LOAD SIGNAL” indication under the following conditions.

Is the inspection result normal? YES >> GO TO 3.
NO >> Go to EC-776, "Diagnosis Procedure".
3.CHECK HEATER FAN CONTROL SWITCH FUNCTIONSelect “HEATER FAN SW” and check indication under the following conditions.

Is the inspection result normal? YES >> INSPECTION END
NO >> Go to EC-776, "Diagnosis Procedure".
Diagnosis Procedure
1.INSPECTION STARTConfirm the malfunctioning circuit (rear window defogger, headlamp or heater fan). Refer to EC-776, "Component Function Check".
Which circuit is related to the incident? Rear window defogger>>GO TO 2 Headlamp>>GO TO 3.
Heater fan>>GO TO 4.
2.CHECK REAR WINDOW DEFOGGER SYSTEMPerform trouble diagnosis of rear window defogger system. Refer to DEF-25, "Work Flow".
>> INSPECTION END
3.CHECK HEADLAMP SYSTEMPerform trouble diagnosis of headlamp system. Refer to EXL-43, "Work Flow".
>> INSPECTION END
4.CHECK AIR CONDITIONING SYSTEMPerform trouble diagnosis of air conditioning system. Check type of air conditioning system HAC-10, "Information" and refer to the follows.
• TYPE1: HAC-44, "Work Flow" • TYPE2: HAC-135, "Work Flow" • TYPE3: HAC-216, "Work Flow" • TYPE4: HAC-271, "Work Flow" • TYPE5: HAC-322, "Work Flow"
>> INSPECTION END