Engine Control System HR16DE
Malfunction indicator
In this manual: Engine Control System HR16DE
~1min read
Component Function Check
1.CHECK MI FUNCTION 1. Turn ignition switch ON.2. Make sure that MI lights up.
Is the inspection result normal? YES >> INSPECTION END
NO >> Go to EC-789, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK DTCCheck that DTC U1001 is not displayed.
Is DTC detected? YES >> Perform trouble diagnosis for DTC U1001. Refer to EC-569, "Diagnosis Procedure".
NO >> GO TO 2.
2.CHECK COMBINATION METERCheck DTC with combination meter. Refer to MWI-36, "DTC Index".
Is DTC detected? YES >> Perform troubleshooting relevant to DTC indicated.
NO >> GO TO 3.
3.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-69, "Exploded View".
NO >> Repair or replace harness or connectors.
Was this page helpful?