Information display (speed limiter)
Component Function Check
1.CHECK INFORMATION DISPLAY (SPEED LIMITER) FUNCTION 1. Start engine. 2. Press speed limiter MAIN switch.3. Drive the vehicle at more than 30 km/h.
CAUTION:Always drive vehicle at a safe speed. 4. Press SET/COAST switch.
5. Perform a test drive on a flat road conditions. Check that the speedometer indicated the same value as the set speed indicator on the information display while depressing the accelerator pedal until just before a kickdown occurs.
Is the inspection result normal? YES >> INSPECTION END
NO >> Go to EC-788, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK DTCCheck that DTC UXXXX, P0500 or P1574 is not display.
Is the inspection result normal? YES >> GO TO 2.
NO-1 >> Perform trouble diagnosis for DTC UXXXX.
NO-2 >> Perform trouble diagnosis for DTC P0500. Refer to EC-673, "Diagnosis Procedure".
NO-3 >> Perform trouble diagnosis for DTC P1574. Refer to EC-723, "Diagnosis Procedure".
2.CHECK DTC WITH COMBINATION METERCheck DTC with combination meter. Refer to EC-522, "DTC Index".
Is the inspection result normal? YES >> GO TO 3.
NO >> Perform trouble diagnosis relevant to DTC indicated.
3.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
Is the inspection result normal? YES >> Replace combination meter.
NO >> Repair or replace.