Ventilation, Heater & Air Conditioner

A/c Auto Amp.

5steps
~30min
2/5difficulty
Done 0 of 5
Diagnosis Procedure

CHECK FUSE

Check fuses [No. 14 and 29, located in the fuse block (J/B)].

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace the blown fuse after repairing the affected circuit.

CHECK A/C AUTO AMP. POWER SUPPLY

  1. Ignition switch OFF.

  2. Disconnect A/C auto amp. connector.

  3. Check voltage between A/C auto amp. harness connector and ground.

    +−

    Voltage

    (Approx.)
    A/C auto amp.Ignition switch position
    ConnectorTerminalOFFACC or ONON or START
    M50 23 Ground 0 V 0 V Battery voltage
    3 Battery voltage Battery voltage Battery voltage

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector between A/C auto amp. and fuse block (J/B).

CHECK A/C AUTO AMP. GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Check continuity between A/C auto amp. harness connector and ground.

    A/C auto amp.—Continuity
    ConnectorTerminal
    M50 2 Ground Yes
    22

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair harness or connector.