Ventilation, Heater & Air Conditioner

Intake Door Motor

8steps
~48min
2/5difficulty
Done 0 of 8
Diagnosis Procedure

CHECK INTAKE MODE DOOR MOTOR POWER SUPPLY

  1. Ignition switch ON.

  2. Check voltage between intake mode door motor harness connector and ground.

    +−

    Voltage

    (Approx.)
    Intake mode door motor
    ConnectorTerminal
    M153 1 Ground Battery voltage

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

GO TO 4.

CHECK INTAKE MODE DOOR MOTOR GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect intake mode door motor connector.

  3. Check continuity between intake mode door motor harness connector and ground.

    Intake mode door motor—Continuity
    ConnectorTerminal
    M153 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK INSTALLATION OF INTAKE MODE DOOR MOTOR

Check intake mode door motor is properly installed. Refer to Exploded View.

Is the inspection result normal?

YES>>

Replace intake mode door motor. Refer to Removal and Installation.

NO>>

Repair or replace malfunctioning part.

CHECK INTAKE MODE DOOR MOTOR POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect intake mode door motor connector and A/C auto amp. connector.

  3. Check continuity between intake mode door motor harness connector and A/C auto amp. harness connector.

    Intake mode door motorA/C auto amp.Continuity
    ConnectorTerminalConnectorTerminal
    M153 1 M50 17 Yes

Is the inspection result normal?

YES>>

Replace A/C auto amp. Refer to Removal and Installation.

NO>>

Repair harness or connector.