Ventilation, Heater & Air Conditioner

Mode Door Motor

8steps
~48min
2/5difficulty
Done 0 of 8
Diagnosis Procedure

CHECK MODE DOOR MOTOR POWER SUPPLY

  1. Ignition switch ON.

  2. Check voltage between mode door motor harness connector and ground.

    +−

    Voltage

    (Approx.)
    Mode door motor
    ConnectorTerminal
    M154 1 Ground Battery voltage

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

GO TO 4.

CHECK MODE DOOR MOTOR GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect mode door motor connector.

  3. Check continuity between mode door motor harness connector and ground.

    Mode door motor—Continuity
    ConnectorTerminal
    M154 2 Ground Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair harness or connector.

CHECK INSTALLATION OF MODE DOOR MOTOR CONTROL LINKAGE

Check mode door motor control linkage is properly installed. Refer to Exploded View.

Is the inspection result normal?

YES>>

Replace mode door motor. Refer to Removal and Installation.

NO>>

Repair or replace malfunctioning part.

CHECK MODE DOOR MOTOR POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect mode door motor connector and A/C auto amp. connector.

  3. Check continuity between mode door motor harness connector and A/C auto amp. harness connector.

    Mode door motorA/C auto amp.Continuity
    ConnectorTerminalConnectorTerminal
    M154 1 M50 17 Yes

Is the inspection result normal?

YES>>

Replace A/C auto amp. Refer to Removal and Installation.

NO>>

Repair harness or connector.