Engine Oil

Checking the Engine Oil Level

1. Observe all oil manufacturer precautions.

2. Make sure the vehicle is on level ground in P (Park) with the parking brake set and the wheels blocked.

3. Start the engine and let it warm up to normal operating temperature.

4. Turn off the engine and wait about five minutes for the oil to return to the oil pan.

5. Pull out the dipstick, wipe it clean, and fully reinsert it.

6. Pull out the dipstick again and check the level. The level should be between the F and L marks.

7. If the level is near L, add enough oil to bring the level up to F.

NOTICE

To avoid engine damage:

• Do not overfill the engine oil. Add oil in small amounts and recheck the level so the engine is not overfilled.
• Do not spill engine oil when adding or replacing engine oil. Use a funnel to prevent oil from contacting engine components. Wipe up spilled oil immediately.

NOTICE

Use only the specified engine oil (see "Recommended Lubricants and Capacities" in Chapter 8).

Engine Oil and Filter Inspection

Have the engine oil and filter replaced by an authorized HYUNDAI dealer in accordance with the Maintenance Schedule at the beginning of this chapter.

WARNING

CALIFORNIA PROPOSITION 65 WARNING

Engine oil contains chemicals known to the State of California to cause cancer, birth defects, and reproductive harm. Used engine oil may cause skin irritation or skin cancer with prolonged contact. Always protect your skin by washing thoroughly with soap and warm water as soon as possible after handling used oil.