Supplemental Restraint Systems

Data List / Active Test

~1min read

DATA LIST / ACTIVE TEST

HINT:

The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.

DATA LIST FOR AIRBAG SENSOR ASSEMBLY

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Body Electrical / SRS Airbag / Data List.

(f) Read the Data List by following the Techstream instructions.

Body Electrical > SRS Airbag > Data List

Tester display

Item

Range

Normal Condition

Diagnostic Note

Driver Seat Position

Driver Seat Position

Forward: Driver seat position moved forward

Bkward: Driver seat position moved backward

Fail: Malfunction detected

Forward/Backward

-

Display Type Information

Display Type Information

LR: Display indicated by left/right (LH/RH)

DP: Display indicated by driver/passenger (Driver/Passenger)

LR

-

Number of Past DTC

Number of Past DTCs

Min.: 0, Max.: 255

0

-