Supplemental Restraint Systems

Check Mode Procedure

~1min read

CHECK MODE PROCEDURE

CHECK MODE (SIGNAL CHECK): DTC CHECK

(a) Turn the ignition switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn on the Techstream.

(e) Select the following menu items: Body Electrical / SRS Airbag / Utility / Signal Check.

Body Electrical > SRS Airbag > Utility

Signal Check

NOTICE:

Select the Signal Check screen on the Techstream to clear the DTCs (current and history).

HINT:

  • Compared with the normal diagnosis mode, the check mode detects DTCs more sensitively.
  • If a malfunction is suspected in a squib circuit, perform the check in check mode even if a normal system code is output during the normal diagnosis mode check.