Removal
REMOVAL
PRECAUTION / NOTICE / HINT
NOTICE:
Be sure to hold the front wiper arm up. Lifting the front wiper arm by the wiper blade may damage or deform the front wiper blade.
HINT:
- Use the same procedure for the right and left sides.
- The procedure described below applies to the left side.
PROCEDURE
1. REMOVE FRONT WIPER BLADE
(a) Press the front wiper blade lock button to release the locking mechanism.
*a |
Lock button |
![]() |
Push in |
![]() |
Remove in this direction |
(b) Remove the front wiper blade from the front wiper arm, as shown in the illustration.
NOTICE:
Place a piece of cloth between the front wiper arm and the windshield to prevent damage to the windshield.
2. REMOVE FRONT WIPER RUBBER
HINT:
The wiper rubber can be removed from either of the two ends of the front wiper blade.
(a) Pull the wiper rubber in the direction indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slots on the front wiper blade.
*a |
Slot |
- |
- |
(b) Pull the end of the wiper rubber out through the slots of the wiper blade in the direction indicated by the arrow in the illustration to remove the wiper rubber.
*a |
Slot |
*b |
Protective cap |
![]() |
Remove in this direction |
NOTICE:
Be careful not to remove the protective caps. If a protective cap is removed, the wiper rubber may come off the front wiper blade while the vehicle is being driven.
.png)
.png)