Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
NOTICE:
Be sure to hold the front wiper arm up. Lifting the front wiper arm by the wiper blade may damage or deform the front wiper blade.
HINT:
- Use the same procedure for the right and left sides.
- The procedure described below applies to the left side.
PROCEDURE
1. INSTALL FRONT WIPER RUBBER
HINT:
The wiper rubber can be installed from either end of the front wiper blade.
(a) Insert the front wiper rubber into the slot of the wiper blade, as shown in the illustration.
*a |
Slot |
![]() |
Install in this direction |
(b) Pull the wiper rubber in the direction indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slots on the front wiper blade.
*a |
Slot |
- |
- |
(c) Slide the wiper rubber in the direction indicated by the arrow in the illustration to install it. NOTICE: Make sure each end of the wiper rubber is fully inserted into each protective cap. |
|
2. INSTALL FRONT WIPER BLADE
(a) Insert the front wiper arm projection into the front wiper blade groove in the direction indicated by arrow (1) in the illustration.
*a |
Front wiper arm projection |
*b |
Front wiper blade groove |
*c |
Lock button |
- |
- |
![]() |
Install in this direction (1) |
![]() |
Install in this direction (2) |
(b) Slide the front wiper blade in the direction indicated by arrow (2) in the illustration until the lock button locks, to install the front wiper blade.
NOTICE:
Make sure the lock button is locked in place.
.png)

.png)