Maintenance

Removal

~1min read

REMOVAL

PRECAUTION / NOTICE / HINT

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. REMOVE FRONT WHEEL

Click here

2. DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto a painted surface, wipe it off immediately.

3. REMOVE FRONT HOSE

(a) Remove the union bolt and gasket, and disconnect the front brake hose from the front disc brake cylinder assembly.

(b) Remove the bolt and disconnect the front hose from the shock absorber sub-assembly.

(c) Using a flare nut wrench, disconnect the brake tube while holding the front hose with a wrench.

NOTICE:

  • Do not kink or damage the brake tube.
  • Make sure that no foreign matter, such as dirt or dust, enters the brake tube through the connection points.

(d) Remove the clip and the front hose from the vehicle body.