Maintenance

Installation

~1min read
0102030405015.411N·mlb·ft
Tightening torque found on this page

INSTALLATION

PROCEDURE

1. INSTALL BATTERY

HINT:

After replacing the battery, perform the "Clear Integrated Current Value" and "Change Battery Type" procedures.

Click here

(a) Install the battery in the vehicle.

(b) Install the battery clamp No. 2 with the bolt.

Torque:

15.4 N·m {157 kgf·cm, 11 ft·lbf}

(c) Install the battery insulator on the battery.

(d) Connect the cable to the battery positive (+) terminal, and engage the clamp.

(e) Tighten the nut.

Torque:

5.6 N·m {57 kgf·cm, 50 in·lbf}

(f) Engage the 2 claws and install the fuse blade cover.

2. CONNECT THE CABLE TO THE NEGATIVE BATTERY TERMINAL

(a) Connect the cable to the negative (-) battery terminal and tighten the nut.

Torque:

5.4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When the cable has been disconnected, some systems must be reset after the cable is reconnected.

Click here

3. PERFORM INITIALIZATION

(a) Perform the "Clear Integrated Current Value" and "Change Battery Type" procedures after replacing the battery.

Click here