Toyota Land Cruiser Quiz
Body Electrical

Inspection

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040502.92N·mlb·ft
Tightening torque found on this page

INSPECT LOWER SUSPENSION ARM BALL JOINT FOR ROTATION CONDITION

INSPECT LOWER SUSPENSION ARM BALL JOINT FOR ROTATION CONDITION

(a) As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut.

(b) Using a torque wrench, turn the nut continuously one turn per 3 - 5 seconds and take the torque reading on the 5th turn.

Turning torque: 0.29 - 2,9 N·m

INSTALLATION

Installation is in the reverse order of removal (SA-75 ).

HINT: After installation, check the front wheel alignment (SA-6 ).

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.