Body Electrical
On-vehicle inspection
In this manual: Body Electrical
~1min read
1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR
3. INSPECT INJECTOR RESISTANCE

(a) Disconnect the 8 injector connectors.
(b) Using an ohmmeter, measure the resistance between the terminals.
Resistance: 13.4 - 14.2 W at 20C (68F)
If the resistance is not as specified, replace the injector.
(c) Reconnect the 8 injector connectors.
4. REINSTALL INTAKE AIR CONNECTOR
5. REINSTALL V-BANK COVER
Test yourself
A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?