Toyota Land Cruiser Quiz
Body Electrical

Reassembly

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
6special tools
050100150200250147108N·mlb·ft
Tightening torque found on this page

1. INSTALL BEARING AND BUSHING

INSTALL BEARING AND BUSHING

(a) Using SST and a press, install a new bearing and bushing.

SST 09950-60010 (09951-00540), 09950-70010 (09951-07100)

(b) Apply synthetic oil and lithium soap base chassis grease, NLGI No. 1 to the steering knuckle inner side of the bushing.

2. INSTALL OIL SEAL

INSTALL OIL SEAL

(a) Using SST and a press, install a new oil seal.

SST 09950-60020 (09951-00910), 09950-70010 (09951-07100)

(b) Coat the lip of the oil seal with MP grease.

3. INSTALL STEERING KNUCKLE ARM

(a) Clean the threads of the 2 bolts and steering knuckle with toluene or trichloroethylene.

(b) Apply sealant to the bolt threads.

Sealant: Part No. 08833-00070, THREE BOND 1324 or equivalent

(c) Install the steering knuckle arm with the 2 bolts.

Torque: 147 N·m

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.