Toyota Land Cruiser Quiz
Body Electrical

Reassembly

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read

Reassembly is in the reverse of disassembly (AC-63 ).

AFTER REASSEMBLY, CHECK MAGNETIC CLUTCH CLEARANCE

AFTER REASSEMBLY, CHECK MAGNETIC CLUTCH CLEARANCE

(a) Set the dial indicator to the pressure plate of the magnetic clutch.

(b) Connect the magnetic clutch lead wire to the battery positive (+) terminal.

(c) Check the clearance between the pressure plate and rotor when connecting the negative (-) terminal to the battery.

Standard clearance: 0.5 +- 0.15 mm (0.020 +- 0.0059 in.)

If the clearance is not within the standard clearance, adjust the clearance using shims to obtain the standard clearance.

Shim thickness: 0.1 mm (0.004 in.) 0.3 mm (0.012 in.) 0.5 mm (0.020in.)

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.