Body Electrical
Removal
In this manual: Body Electrical
~1min read
1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES
2. STOP ENGINE
3. DISCONNECT NEGATIVE (- ) TERMINAL CABLE FROM BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
5. REMOVE ENGINE UNDER COVER
6. REMOVE DRIVE BELT (AC-16 )
7. DISCONNECT DISCHARGE AND SUCTION HOSES

Remove the 2 bolts and disconnect the both hoses.
NOTICE: Cap the open fittings immediately to keep moisture or dirt out of the system.
8. REMOVE FRONT DRIVE SHAFT LH (SA-26 )
9. REMOVE COMPRESSOR

(a) Disconnect the connector.
(b) Remove the 3 bolts and the compressor.
Test yourself
A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?