Engine, Hybrid System
Manual Shifting Test
In this manual: Engine, Hybrid System
~1min read
MANUAL SHIFTING TEST1. MANUAL SHIFTING TEST HINT:
(a) Disconnect the connector of the transmission wire.
HINT: It is possible to deactivate the electrical shift control by disconnecting the transmission wire. The gear positions can then be changed mechanically with the shift lever. (b) Drive the vehicle with the transmission wire disconnected. Move the shift lever to each position to check whether the gear position changes as shown in the table below.
(c) Connect the connector of the transmission wire. (d) Clear the DTCs (See page |
Was this page helpful?