Daewoo Nexia Quiz
Fuel and Exhaust Systems

Daewoo Nexia: Throttle Position Sensor (TPS)

In this manual: Fuel and Exhaust Systems
OWNER'S MANUAL — 12Vehicle Maintenance — 15Maintenance — 16Engine (Single Overhead Camshaft) — 50Engine (dual overhead camshafts) — 45Cooling System — 14Fuel and Exhaust Systems — 31Engine Electrical Equipment — 16Ignition System — 8Electronic Control Unit and Sensors — 12Clutch — 11Five-Speed Transmission and Final Drive RPO MM5 — 16Automatic Transmission — 46Wheels and Tires — 17Front Suspension — 13Front Axle Drive Shafts — 10Rear Suspension — 12Brake System — 54Body — 127Heating, Ventilation and Air Conditioning System — 21Electrical System — 7Wiring Diagrams — 25
~1min read

Remove or disconnect:

PROCEDURE.

1. TPS electrical connector..

2. Unscrew the mounting screws (2 pcs.)..

3. Sensor..

Warning.

The TPS is an electromechanical component. To prevent failure, it must not

come into contact with any solvents or cleaners..

Installation

PROCEDURE.

1. With the throttle valve closed, install the TPS onto the throttle shaft, then rotate the TPS housing until the mounting holes align with the threaded

holes..

2. Install the mounting screws..

3. Tighten the TPS mounting screws.

Test yourself

A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.